DynaLoader - Dynamically load C libraries into Perl code

dl_error() , dl_findfile() , dl_expandspec() , dl_load_file() , dl_find_symbol() , dl_undef_symbols() , dl_install_xsub() , boostrap() - routines used by DynaLoader modules


package YourPackage; require DynaLoader; @ISA = qw(... DynaLoader ...); bootstrap YourPackage;


This document defines a standard generic interface to the dynamic linking mechanisms available on many platforms. Its primary purpose is to implement automatic dynamic loading of Perl modules.

This document serves as both a specification for anyone wishing to implement the DynaLoader for a new platform and as a guide for anyone wishing to use the DynaLoader directly in an application.

The DynaLoader is designed to be a very simple high-level interface that is sufficiently general to cover the requirements of SunOS, HP-UX, NeXT, Linux, VMS and other platforms.

It is also hoped that the interface will cover the needs of OS/2, NT etc and also allow pseudo-dynamic linking (using ld -A at runtime).

It must be stressed that the DynaLoader, by itself, is practically useless for accessing non-Perl libraries because it provides almost no Perl-to-C 'glue'. There is, for example, no mechanism for calling a C library function or supplying arguments. It is anticipated that any glue that may be developed in the future will be implemented in a separate dynamically loaded module.

DynaLoader Interface Summary

@dl_library_path @dl_resolve_using @dl_require_symbols $dl_debug Implemented in: bootstrap($modulename) Perl @filepaths = dl_findfile(@names) Perl $libref = dl_load_file($filename) C $symref = dl_find_symbol($libref, $symbol) C @symbols = dl_undef_symbols() C dl_install_xsub($name, $symref [, $filename]) C $message = dl_error C

The standard/default list of directories in which dl_findfile() will search for libraries etc. Directories are searched in order: $dl_library_path[0], [1], ... etc

@dl_library_path is initialised to hold the list of 'normal' directories (/usr/lib, etc) determined by Configure ($Config{'libpth'}). This should ensure portability across a wide range of platforms.

@dl_library_path should also be initialised with any other directories that can be determined from the environment at runtime (such as LD_LIBRARY_PATH for SunOS).

After initialisation @dl_library_path can be manipulated by an application using push and unshift before calling dl_findfile() . Unshift can be used to add directories to the front of the search order either to save search time or to override libraries with the same name in the 'normal' directories.

The load function that dl_load_file() calls may require an absolute pathname. The dl_findfile() function and @dl_library_path can be used to search for and return the absolute pathname for the library/object that you wish to load.

A list of additional libraries or other shared objects which can be used to resolve any undefined symbols that might be generated by a later call to load_file().

This is only required on some platforms which do not handle dependent libraries automatically. For example the Socket Perl extension library (auto/Socket/Socket.so) contains references to many socket functions which need to be resolved when it's loaded. Most platforms will automatically know where to find the 'dependent' library (e.g., /ulibsocket.so). A few platforms need to to be told the location of the dependent library explicitly. Use @dl_resolve_using for this.

Example usage:

@dl_resolve_using = dl_findfile('-lsocket');

A list of one or more symbol names that are in the library/object file to be dynamically loaded. This is only required on some platforms.


$message = dl_error();

Error message text from the last failed DynaLoader function. Note that, similar to errno in unix, a successful function call does not reset this message.

Implementations should detect the error as soon as it occurs in any of the other functions and save the corresponding message for later retrieval. This will avoid problems on some platforms (such as SunOS) where the error message is very temporary (e.g., dlerror()).

Internal debugging messages are enabled when $dl_debug is set true. Currently setting $dl_debug only affects the Perl side of the DynaLoader. These messages should help an application developer to resolve any DynaLoader usage problems.

$dl_debug is set to $ENV{'PERL_DL_DEBUG'} if defined.

For the DynaLoader developer/porter there is a similar debugging variable added to the C code (see dlutils.c) and enabled if Perl was built with the -DDEBUGGING flag. This can also be set via the PERL_DL_DEBUG environment variable. Set to 1 for minimal information or higher for more.


@filepaths = dl_findfile(@names)

Determine the full paths (including file suffix) of one or more loadable files given their generic names and optionally one or more directories. Searches directories in @dl_library_path by default and returns an empty list if no files were found.

Names can be specified in a variety of platform independent forms. Any names in the form -lname are converted into libname.*, where .* is an appropriate suffix for the platform.

If a name does not already have a suitable prefix and/or suffix then the corresponding file will be searched for by trying combinations of prefix and suffix appropriate to the platform: ``$name.o'', ``lib$name.*'' and ``$name''.

If any directories are included in @names they are searched before @dl_library_path . Directories may be specified as -Ldir. Any other names are treated as filenames to be searched for.

Using arguments of the form -Ldir and -lname is recommended.


@dl_resolve_using = dl_findfile(qw(-L/usr/5lib -lposix));


$filepath = dl_expandspec($spec)

Some unusual systems, such as VMS, require special filename handling in order to deal with symbolic names for files (i.e., VMS's Logical Names).

To support these systems a dl_expandspec() function can be implemented either in the dl_*.xs file or code can be added to the autoloadable dl_expandspec() function in DynaLoader.pm. See DynaLoader.pm for more information.


$libref = dl_load_file($filename)

Dynamically load $filename, which must be the path to a shared object or library. An opaque 'library reference' is returned as a handle for the loaded object. Returns undef on error.

(On systems that provide a handle for the loaded object such as SunOS and HPUX, $libref will be that handle. On other systems $libref will typically be $filename or a pointer to a buffer containing $filename. The application should not examine or alter $libref in any way.)

This is function that does the real work. It should use the current values of @dl_require_symbols and @dl_resolve_using if required.

SunOS: dlopen($filename) HP-UX: shl_load($filename) Linux: dld_create_reference(@dl_require_symbols); dld_link($filename) NeXT: rld_load($filename, @dl_resolve_using) VMS: lib$find_image_symbol($filename,$dl_require_symbols[0])


$symref = dl_find_symbol($libref, $symbol)

Return the address of the symbol $symbol or undef if not found. If the target system has separate functions to search for symbols of different types then dl_find_symbol() should search for function symbols first and then other types.

The exact manner in which the address is returned in $symref is not currently defined. The only initial requirement is that $symref can be passed to, and understood by, dl_install_xsub() .

SunOS: dlsym($libref, $symbol) HP-UX: shl_findsym($libref, $symbol) Linux: dld_get_func($symbol) and/or dld_get_symbol($symbol) NeXT: rld_lookup("_$symbol") VMS: lib$find_image_symbol($libref,$symbol)


@symbols = dl_undef_symbols()

Return a list of symbol names which remain undefined after load_file(). Returns () if not known. Don't worry if your platform does not provide a mechanism for this. Most do not need it and hence do not provide it, they just return an empty list.


dl_install_xsub($perl_name, $symref [, $filename])

Create a new Perl external subroutine named $perl_name using $symref as a pointer to the function which implements the routine. This is simply a direct call to newXSUB(). Returns a reference to the installed function.

The $filename parameter is used by Perl to identify the source file for the function if required by die(), caller() or the debugger. If $filename is not defined then ``DynaLoader'' will be used.



This is the normal entry point for automatic dynamic loading in Perl.

It performs the following actions:




Tim Bunce, 11 August 1994.

This interface is based on the work and comments of (in no particular order): Larry Wall, Robert Sanders, Dean Roehrich, Jeff Okamoto, Anno Siegel, Thomas Neumann, Paul Marquess, Charles Bailey, myself and others.

Larry Wall designed the elegant inherited bootstrap mechanism and implemented the first Perl 5 dynamic loader using it.